172 WARNING: Cancer and Reproductive Harm - www P65Warnings ca gov s l California Residents WARNING: Cancer www P65Warnings ca gov TOOLS Rod Bolt Stretch Gauges We highly recommend using a stretch gauge when installing rod bolts and other fasteners where it is possible to measure the length of the bolt after tightening. It is the most accurate way to determine the correct pre-load in the rod bolt. Simply follow manufacturer’s instructions, or use the chart on page 30 of this catalog for ARP fasteners. Measure the fastener prior to starting, and monitor overall length during installation. When the bolt has stretched the specified amount, the correct preload, or torque, has been applied. We recommend you maintain a chart of all rod bolts, and copy down the length of the fastener prior to and after installation. If there is a permanent increase of .001˝ in length or more, or if there is deformation, the bolt should be replaced immediately. Don’t chance it! A sample chart is as follows: ARP offers a highly accurate stretch gauge with a dial indicator that reads in increments of .0005˝. Features extra heavy springs for consistent repetition. Comes with a heavy-duty, insulated plastic carrying case for protection. A must for any serious engine builder. Product Part # Thread Sealer (1 69 fl oz ) 100-9904 s Thread Sealer ARP Thread Sealer is a premium grade thread sealer that is designed for use on all wet deck cylinder block applications in order to prevent coolant leakage past the head bolt threads, while duplicating the recommended installation pre-loads associated with all ARP cylinder head bolts and studs. ARP thread sealer can also be used on pipe plugs, pipe fittings, fuel line fittings or any fitting that requires a flexible leak proof seal. ARP thread sealer is designed for use on aluminum, steel, stainless steel and plastic materials against coolants, water, gasoline, oil, natural gas and LPG. • .PTFE based formula w/rust & corrosion inhibitors • Effective range: -30˚ to 550˚F • Application: aluminum, steel, stainless steel and plastic against coolants, water, gasoline, natural gas and LPG • Sealant range: 10,000 psi (pressure) Product Part # Stretch Gauge 100-9941 s Stretch Gauge, billet-style 100-9942 s Stretch Gauge, digital 100-9943 s
RkJQdWJsaXNoZXIy OTg4MDk=